Greenstuff world – 10x Classic WALL Lamps with LED Lights
10x Classic WALL Lamps with LED Lights
Fully Assembled Classic WALL Lamps made of black hard plastic with wire and resistor for Plug and Play use.
You may Connect them to any power source between 3V to 18V(3V dim light,12V bright light).
These lamps will specially look great with 9-12 Volts of power input.
If you are not good at electricity, you may just use them without switch them on ;)
Resistor: 1.5kΩ,1/4W
Length of the wires: 15cm+15cm
Best scale: 28mm Alternative valid scales: 25-54mm
Total height: 3cm
Content: 10 classic street lamps with lights
Greenstuff world – 10x Classic Lamps with LED Lights
10x Classic Lamps with LED Lights
Fully Assembled Classic Street Lamps made of black hard plastic with wire and resistor for Plug and Play use.
You may Connect them to any power source between 3V to 18V(3V dim light,12V bright light).
These lamps will specially look great with 9-12 Volts of power input.
If you are not good at electricity, you may just use them without switch them on ;)
Resistor: 1.5kΩ,1/4W
Length of the wires: 15cm+15cm
Best scale: 28mm Alternative valid scales: 25-54mm
Total height: 8,5cm
Content: 10 classic street lamps with lights
Greenstuff World – Conductive Paint
Conductive Paint
Highly conductive waterbased paint with silver specially formulated for model and diorama building, or in electronics such as LED connections, circuit paths, repairing circuit boards and others. Can be used on a variety of surfaces including plastic, resins, metal, paper and wood.
Paint must be applied in homogenous layers, without needing to be too thick. Once the paint has fully dried, it will act as a conductor of electricity up to at least 30-40cm without losing any conductivity. We recommend to use 3V to 9V batteries.
Content: 1x 15ml bottle
* Not valid for airbrush.
tutorial
Greenstuff World – LED Lighting Kit with Switch
LED Lighting Kit with Switch
Fully Assembled lighting kit for leds with pre-attached mini-switch for almost Plug and Play use. All in one light package.
To be used with a standard coin cell CR2030 (3v), not included in the kit. To help wire conections use shrink-tubes also available at our shop.
Length of the wires: 120mm + 120mm
Cell holder size: 22 x 3.2mm
Greenstuff World – Shrink tubes for LED connections
Heat Shrink Tube for LED Connections
A heat shrink tubing is a flexible plastic tubing that tightens when exposed to heat, and is used to secure the connections between the cables. Due to its size, it is ideal for assembling cables of led lights. After installing the Shrink Tube, use a lighter to secure the connection.
Colour: Black
Contents: 20 Heat Shrink Tubing for LED Lights
Greenstuff World – Cool White LED Lights – 2mm
Cool White LED Lights
Fully Assembled LEDs with plastic wire and resistor for Plug and Play use.
You may Connect these LEDs to any power source between 3V to 18V(3V dim light,12V bright light).
These solid non-flashing LEDs will specially look great with 9-12 Volts of power input.
Resistor: 1.5kΩ,1/4W
Length of the wires: 20cm+20cm
LED Thickness: 2mm
LED Color: Cool White
Content: 10 led lights
TRICKS:
- Use a lighter for stripping the wires When required. Do not expose too long to fire, or the Entire led will burn.
Greenstuff World – Green LED Lights – 2mm
Green LED Lights
Fully Assembled LEDs with plastic wire and resistor for Plug and Play use.
You may Connect these LEDs to any power source between 3V to 18V(3V dim light,12V bright light).
These solid non-flashing LEDs will specially look great with 9-12 Volts of power input.
Resistor: 1.5kΩ,1/4W
Length of the wires: 20cm+20cm
LED Thickness: 2mm
LED Color: GREEN
Content: 10 led lights
TRICKS:
- Use a lighter for stripping the wires When required. Do not expose too long to fire, or the Entire led will burn.
Greenstuff World – Red LED Lights – 2mm
Red LED Lights
Fully Assembled LEDs with plastic wire and resistor for Plug and Play use.
You may Connect these LEDs to any power source between 3V to 18V(3V dim light,12V bright light).
These solid non-flashing LEDs will specially look great with 9-12 Volts of power input.
Resistor: 1.5kΩ,1/4W
Length of the wires: 20cm+20cm
LED Thickness: 2mm
LED Color: RED
Content: 10 led lights
TRICKS:
- Use a lighter for stripping the wires When required. Do not expose too long to fire, or the Entire led will burn.
Greenstuff World – Cool white LED Lights – 1mm
Cool White LED Lights
Fully Assembled LEDs with plastic wire and resistor for Plug and Play use.
You may Connect these LEDs to any power source between 3V to 18V(3V dim light,12V bright light).
These solid non-flashing LEDs will specially look great with 9-12 Volts of power input.
Resistor: 1.5kΩ,1/4W
Length of the wires: 20cm+20cm
LED Thickness: 1mm
LED Color: Cool White
Content: 10 led lights
TRICKS:
- Use a lighter for stripping the wires When required. Do not expose too long to fire, or the Entire led will burn.
Greenstuff World – Green LED Lights – 1mm
Green LED Lights
Fully Assembled LEDs with plastic wire and resistor for Plug and Play use.
You may Connect these LEDs to any power source between 3V to 18V(3V dim light,12V bright light).
These solid non-flashing LEDs will specially look great with 9-12 Volts of power input.
Resistor: 1.5kΩ,1/4W
Length of the wires: 20cm+20cm
LED Thickness: 1mm
LED Color: GREEN
Content: 10 led lights
TRICKS:
- Use a lighter for stripping the wires When required. Do not expose too long to fire, or the Entire led will burn
Greenstuff World – Red LED Lights – 1mm
Red LED Lights
Fully Assembled LEDs with plastic wire and resistor for Plug and Play use.
You may Connect these LEDs to any power source between 3V to 18V(3V dim light,12V bright light).
These solid non-flashing LEDs will specially look great with 9-12 Volts of power input.
Resistor: 1.5kΩ,1/4W
Length of the wires: 20cm+20cm
LED Thickness: 1mm
LED Color: RED
Content: 10 led lights
TRICKS:
- Use a lighter for stripping the wires When required. Do not expose too long to fire, or the Entire led will burn.