Showing 1–12 of 230 results

Show sidebar

Greenstuff world- 100% Anti-magnetic QUARTZ Tweezers SET

12.50
Professional Tweezers for precision and accurated tasks. Use when setting tiny magnets, making jewelry, setting stones, designing jewelry, repairing watches and more. They are lightweight and comfortable to hold while using them. They are 100% anti magnetic. Properties: - 100% Anti-magnetic - Made of non-corrosive stainless steel - Anti-acid

Greenstuff world- Hobby chain 1.5 mm

2.50
Hobby chain set in 1.5 mm, perfect for scales of 32mm or smaller. Color Antique Bronze This set includes 1 complete meter.

Greenstuff-Mixing Paint Steel Bearing Balls in 6.35mm

4.50
Set of 40 Stainless steel bearing balls in 6.35mm to mix paints. These mixing balls are coming with a special coat to make them completely paint proof which will avoid the rusting process after long periods in contact with paints that may ruin the paint colors. They are not magnetic but they will be attracted by magnets. They are suitable either for personal or industrial uses in order to guarantee a proper mixture of all paint contents and therefore avoiding having all pigments deposited in the bottom of the pot specially after long term storage. This set includes 40 stainless steel ball bearing in 6.35 mm, perfect for mixing and stirring paints pots such as Vallejo, Model Color and Citadel, among others. These ball bearing are more indicated for paint pots smaller than 40 ml Total weight of 1 ball is 1gr. Quality SS316L

Greenstuff – Classic Wood Crates

5.95
Classic Wood Crates Wooden boxes made of a combination of high quality MDF wood and extra hard cardboard, laser cut with precision. This modelling accessory allows you to easily construct your own crates using fully detailed parts, resulting in very realistic crates complete with wood lines and nails. They're perfect for wargames to enhance gameplay and create cover, or for dioramas and scenery. You can build up to six wooden crates. Four large squared boxes and two smaller rectangular boxes. The large crates are 28x28x28mm and the small crates are 26x20x20mm. We recommend using PVA glue for their assembly. This product comes unpainted and without decals and it is perfect for 25-28-35 mm miniatures (1:76, 1:48, 1:35).

Greenstuff – Chaos Runes and Symbols

5.75
Chaos Runes and Symbols Collection of 300 chaos themed runes, symbols and signs made of brass. There are 12 different types to choose from, separated in different compartments. They are perfect for adding details to armour, weapons and banners of your models and miniatures or for decorating dioramas. We recommend using cyanocrylate glue in small quantities. Approximate thickness of characters: 0.26mm Size: 2-4mm Quantity: 300 characters (25 units of each character) NOTICE: Due to the small thickness and size of the pieces, some could come out of the separator disk, or change compartment.

Greenstuff – Hobby chain 3 mm

2.50
Hobby chain in 3.0 mm are perfect for scales larger than 32mm  larger, dioramas, terrains, or just small scale miniatures but larger or corpulent bodies such as chariots, big monsters, etc...  This set includes 1 complete meter.

Greenstuff – Crackle Paint – Badlands 60ml

6.20
Crackle Paint This is a fast-drying water-based Paint that cracks as it dries to create an eggshell cracking pattern in just 1 step. Apply direct from the bottle to the Surface. No need to apply multiple coats of Paint. In case of surfaces excessively smooth, we recommend sanding them a bit to add roughness to improve the grip of the cracks. Matt Priming normally is enough for the grip. Apply direct or with a brush. Depending on the thickness of application might get different size of cracks. Do not use a heat gun to speed up the drying process, just let it dry naturally.  Take into account that, excessively irregular or very small surfaces may affect the size of the cracks. Includes 1 pot of crackle paint 60ml

Greenstuff – Crackle Paint – Martian Earth 60ml

6.20
Crackle Paint This is a fast-drying water-based Paint that cracks as it dries to create an eggshell cracking pattern in just 1 step. Apply direct from the bottle to the Surface. No need to apply multiple coats of Paint. In case of surfaces excessively smooth, we recommend sanding them a bit to add roughness to improve the grip of the cracks. Matt Priming normally is enough for the grip. Apply direct or with a brush. Depending on the thickness of application might get different size of cracks. Do not use a heat gun to speed up the drying process, just let it dry naturally.  Take into account that, excessively irregular or very small surfaces may affect the size of the cracks. Includes 1 pot of crackle paint 60ml

Greenstuff – SkullGlue Cement for plastics

5.85
SkullGlue Cement for plastics Quick adhesive for plastics used in modeling with an extra fluid formula. Fast drying and leaves no residue. Limited edition cement glue valid for all of the most common plastics used in modeling, allowing you to unify all your glues for plastics in a single product. Not only is it more efficient than many other glue types and brands (as indicated below), but its versatility also means different plastics can be glued among each other using just one glue. Take advantage of this special edition in a crystal bottle shaped like a skull. Valid for the following types of plastics: polystyrene PE, ABS, methacrylate and PVC. CONTENT:  1x SkullGlue Cement 15ml 1x Applicator brush *For plastics only, do not use with other materials. **Fast evaporation, apply and paste the pieces quickly.

Greenstuff – Rolling Pin DWARVEN

14.95
Rolling Pin DWARVEN Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5.5 inches) Diameter: 2.5cm (1 inch) Scale: 28-35mm USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using Sculptor Vaseline (LINK). Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.

Greenstuff – Decal Softener

2.95
Decal Softener The GSW Decal softener is the solution for the application of decals on uneven or rough surfaces. It completely softens the decal to allow it to adapt and be perfectly fixed to the surface of the model in order to avoid the appearance of wrinkles, and in this way, you can obtain perfect results that otherwise would be impossible. Content: 1x 17ml bottle INSTRUCTIONS If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed. Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.

Greenstuff – Decal Fixer

2.95
Decal Fixer GSW Decal Fixer helps the application of decals onto surfaces of models, miniatures and dioramas. The GSW Decal Fixer prepares the surface with special agents that soften the solvents of modern paints making decals more resistant and glue stronger. In addition, the decal fixer makes the decal more flexible and increases the adherence, preventing the silvering effect. Content: 1x 17ml bottle INSTRUCTIONS 1.-  Before applying a decal to your model, apply a bit of GSW Decal Fixer to the surface of the model where you are planning to set your decal. GSW Decal Fixer protects the paint beneath and smooths the surface, thereby helping to prevent silvering. Use a paintbrush to gently push the decal off the sheet and onto the model. If it is hard to move the decal around, adding bit more GSW Decal Fixer or water will help the decal float on the surface until it is positioned correctly. 2.- If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed. Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed. 3.- Finally apply GSW Decal Fixer again to the decal and the surface of the model where we have been working to unify the surface. Coat it as normal with matt or gloss varnish if you consider it necessary to remove or add a glossy finish.